[Waterkeeper]

I ran into trouble with the uprights coming unsealed from the false bottom. I couldn't leave them just floating around under there while i flipped the tank around so I marked the outline of the FB, placed the uprights, marked them on the glass, and siliconed them over the marks.





There are 3 sides to the background on this tank, so I will have to roll it 3 different ways at 3 different times to complete the foam. I had to balance it on the back point to seal in the edges of the false bottom and false back.



Here is how I locked in the filter.. you can link zipties if 1 isn't long enough.