125 Gallon Vertical Build Log w/Pics - Page 3

AndyShores · #21 (**permalink**) 01-01-2009, 03:12 AM

This is a very similar approach as I am planning on taking with my current build that is in progress. A question I have is considering the tree trunk - are you not worried about it rotting and causing the main structure to fall apart down the road? Maybe its a type of wood you're using that is less suseptible to rot? Any info would be greatly appreciated

harrywitmore · #22 (**permalink**) 01-01-2009, 07:56 AM

Quote:

Originally Posted by AndyShores

This is a very similar approach as I am planning on taking with my current build that is in progress. A question I have is considering the tree trunk - are you not worried about it rotting and causing the main structure to fall apart down the road? Maybe its a type of wood you're using that is less suseptible to rot? Any info would be greatly appreciated

Since I'm not keeping any animals I'm using weathered red cedar. These are old and all the soft wood is long gone. They last for years buried in the ground so I'm not worried about them rotting. I am looking for a vine that will withstand the moisture. I have Wisteria and Honeysuckle but I don't think they would last any time. I may be able to find some wild grape but haven't yet. I pretty much trying to complete this project with what I have and not spend a bunch on it. So far I have done that with the exception of the GS, GEII and coir. I'm a pack rat with lots of stuff in the garage instead of cars!

harrywitmore · #23 (**permalink**) 01-03-2009, 04:25 PM

Progress for today. I'm still working on the lighting units. For the side I'm using a 2 tube T12 shop light. I still need to work on the reflecter but here's a shot.

For the top I had a bathroom strip light that we replaced during a remodel and I cut it in half and I'm using the halves for the top light. I will most likely end up with a mixture of bulbs to get the light that I want.

I think the effect is really pretty good. I need to get a grid from loves to cut down on the glare.

harrywitmore · #24 (**permalink**) 01-11-2009, 01:26 PM

I have been working on a LOW budget misting system. I have lots of mist heads I used in the greenhouse so nothing spent there. I want to hook the system into a pump sprayer, which I have done (I'll get pictures later). It seems to work great and no I'm wondering how to automate it. So, I need some type of small solenoid valve that I can cycle on and off with a times. I think the line on the tank is about 3/8". Has anyone seen something like this for sale?

Granted, I will have to keep my 3 gallon sprayer filled and pumped up but since I'm retired that's not a problem. Ideas?

beckdg · #25 (**permalink**) 01-11-2009, 04:06 PM

i believe these diy instructions should fill in any gaps in your system you have. it is also a pretty complete article for a first timer.

Basking Lizards - The best for pet lizards - Articles - Humidifying the Enclosure - Automated Misting System

harrywitmore · #26 (**permalink**) 01-11-2009, 04:17 PM

Awesome! Exactly what I was looking for. I didn't think a large diameter solenoid would work well. I think I have all the parts I need except the timer and they are cheap. Thanks!

beckdg · #27 (**permalink**) 01-11-2009, 05:40 PM

no problem harry... anytime.

XOTICLOVER · #28 (**permalink**) 01-15-2009, 02:08 PM

im curious, what is coir?

harrywitmore · #29 (**permalink**) 01-15-2009, 02:15 PM

Coir is a byproduct of the coconut industry. It's made from the fibrous husk that covers what you normally see in the grocery store as a coconut.

froggsong · #30 (**permalink**) 01-17-2009, 02:47 AM

We refer to coir as "coco fiber" in the pet trade, while it is referred to as "coir" in the orchid trade, from what I have read. Am I right, harry?