
01-19-2009, 02:46 PM
|
 |
Administrator
|
|
Join Date: Apr 2008
Location: Lake Stevens, WA
Posts: 6,052
|
|
Oh yeah, that is definitely a good idea. If that is still hotter than necessary, a 40 and a 25 could be used. Or, putting a 25 watt over the cool side to boost that temp a bit (seems just a tad on the low side), and then a 60 watt over the warm side. Boosting the cool temp will reduce the difference that the temp on the warm side needs to heat. In my current CWD setup, I have a 60W bulb on the cool side (over the water), then a 25W CFL (equal to 100W of 6500K light), and then a separate clamp lamp with a 75W bulb over the warm side (the hood has fixtures for a UV tube and two screw in bulbs. it sits on the left 2/3s of the tank, which is the cooler side). At night, I switch the incandescent bulbs for 75W black light bulbs (yes, it's more wattage, but the temp drops appropriately because the black glass doesn't put out heat the same way that the white bulbs do). Sometimes when it is hotter in the room, I put a 60W white bulb in place of the 75W. He is much happier with the bulbs set up this way, and he basks all the time.
Beth, is he isn't basking at all, it's really important to try to find the temp he prefers. If they don't keep their body temperature at an appropriate level, they can't digest their food. If that happens, it can cause the food to rot in the stomach and poison the animal (less likely), it can also cause impaction (more likely). I realize that may read like a scare tactic, but I promise it isn't. I don't know your level of knowledge, so I want to make sure you know the reason they need to bask.
__________________
|