Hi, I'm new to the site and I thought I would like to share my first viv build. I gained a fair amount of knowledge from this site in particular so I would love to get some feedback... good and bad!
Its a 45 gallon tall tank. The back of the tank was skim coated in Silicone then the drift wood was positioned, 1/4" tubing positioned for a drip wall and filled around it with GS foam. After it cured, I did a bit of trimming and coated it with silicone and pressed in the coco fiber.
The left side corner of the background is actually hollow from the top to the bottom, this is where I have full access to the pump and the 6 head distribution valve. The valve itself has a flow control for each line so I can tailor the flow rate.
I used egg crate for the false bottom, wrapped in weedblock fabric, pea gravel for drainage, more weedblock and finally a layer of cocofiber mixed with orchid mix and some sphagnum moss.
I ran the system for 4 days before putting in the plants. At this point I have:
Spanish Moss (Tillandsia usneoides)
Lobster Claw (Vriesea carinata)
Dendrobium
I have yet to ID the bigger Brom which came in a generic assortment at Home Depot. I also plan on adding Ball Moss (Tillandsia recurvata). This is currently sitting on my patio waiting for me to kill off the ants which actually have a colony in the ball moss. I live in Florida, so I just walk out to a tree and pluck the stuff off.
I have been running the system for 3 days now with the plants and after a while, not sure how long I need to run it, I am considering a rescue of a skunk gecko from a local petco.
Well, thats it, hope you like and any advise around keeping it alive, when to add animals etc is most welcome.