Hello all,
I was going to buy a background for a frog enclosure but decided on doing myself after reading on lots of forums about it. I found some broken polystryene pieces at a local shop and managed to get them for only a few dollars. I cut polystyrene pieces and stuck them on the back. I also cut out grooves for the power cords to hide behind (like exo terra background have).
I also wanted to have a little waterfall, so I put in a piece of pipe in the corner.
I used plastic planters to make my enclosure design and then sprayed over them with expanda foam.
I also stuck some rocks down one corner, to make a drip for my waterfall.
I then painted black silicone over the top and then placed peatmoss on while the silicone was still drying.
I dusted the excess peatmoss off, then started planting some plants in. They are all different types of ferns. Unfortunately, the top plants have started to look a bit unhealthy. So I moved the enclosure from my living room, which I thought may have been drying the plants out with the heater which is in the room (its winter in Australia). Im spraying heaps of water in and Im attempting to heat the tank to around 18 - 25 degrees. Using a water heater to heat the tank.
Instead of having a soil substrate bottom, I have used river stones ontop of finer gravel. Im hoping that will be sufficient for the frogs im looking at getting.
These pictures dont do it any justice, and im sorry that they are so dark. I will take some more tonight. You can see the waterfall in the background which is connected to a small filter under the water. I only turn the pump/filter on for an hour a day just to increase humidity. The pump was actually more powerful than I expected, I was kind of expecting a slight dribble but it still a really cool feature. The tank will hopefully soon house some Australian Red Eyed Tree frogs (
Litoria chloris).
Let me know what you think?
William